FPR-C9300-AC
Overview
This carrier-grade next-generation firewall (NGFW) is ideal for data centers and other high-performance settings that require low latency and high throughput. Deliver scalable, consistent security to workloads and data flows across physical, virtual, and cloud environments. With tightly integrated services, the Firepower 9000 Series lowers costs and supports open, programmable networks.
Quick Specs
Figure 1 shows the appearance of FPR-C9300-AC.
Table 1 shows the Quick Specs.
|
Product Number |
FPR-C9300-AC |
|||
|
Dimensions (H x W x D) |
5.25 x 17.5 x 32 in. (13.3 x 44.5 x 81.3 cm) |
|||
|
Form factor |
3 Rack Units (3RU), fits standard 19-in. (48.3-cm) square-hole rack |
|||
|
Security module slots |
3 |
|||
|
Network module slots |
2 (within supervisor) |
|||
|
Supervisor |
Cisco Firepower 9000 Supervisor with 8 x 10 Gigabit Ethernet ports and 2 network module slots for I/O expansion |
|||
|
Security modules |
Cisco Firepower 9000 Security Module 24 with 2 x SSDs in RAID-1 configuration
Cisco Firepower 9000 Security Module 36 with 2 x SSDs in RAID-1 configuration |
|||
|
Network modules |
8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network modules
4 x 40 Gigabit Ethernet Quad SFP+ network modules 2 x 100 Gigabit Ethernet Quad SFP28 network modules (double-wide, occupies both network module bays) Note: Firepower 9300 may also be deployed as a dedicated threat sensor, with fail-to-wire network modules. Please contact your Cisco representative for details. |
|||
|
Maximum number of interfaces |
Up to 24 x 10 Gigabit Ethernet (SFP+) interfaces; up to 8 x 40 Gigabit Ethernet (QSFP+) interfaces with 2 network modules |
|||
|
Integrated network management ports |
1 x Gigabit Ethernet copper port (on supervisor) |
|||
|
Serial port |
1 x RJ-45 console |
|||
|
USB |
1 x USB 2.0 |
|||
|
Storage |
Up to 2.4 TB per chassis (800 GB per security module in RAID-1 configuration) |
|||
|
Power supplies |
|
AC power supply |
-48V DC power supply |
HVDC power supply |
|
Input voltage |
200 to 240V AC |
-40V to -60V DC* |
240 to 380V DC |
|
|
Maximum input current |
15.5A to 12.9A |
69A to 42A |
<14A at 200V |
|
|
Maximum output power |
2500W |
2500W |
2500W |
|
|
Frequency |
50 to 60 Hz |
– |
– |
|
|
Efficiency (at 50% load) |
92% |
92% |
92% (at 50% load) |
|
|
Redundancy |
1+1 |
|||
|
Fans |
4 hot-swappable fans |
|||
|
Noise |
75.5 dBA at maximum fan speed |
|||
|
Rack mountable |
Yes, mount rails included (4-post EIA-310-D rack) |
|||
|
Weight |
105 lb (47.7 kg) with one security module; 135 lb (61.2 kg) fully configured |
|||
|
Temperature: standard operating |
Up to 10,000 ft (3000 M): 32 to 104°F (0 to 40°C) for SM-24 module 32 to 88°F (0 to 35°C) for SM-36 module at sea-level Altitude adjustment notes: For SM-36, maximum temp is 35?°C, for every 1000 feet above sea level subtract 1?°C |
|||
|
Temperature: NEBS operating |
Long term: 0 to 45°C, up to 6,000 ft (1829 m) Long term: 0 to 35°C, 6,000 to 13,000 ft (1829-3964 m) Short term: -5 to 55°C, up to 6,000 ft (1829 m) Note: Cisco Firepower 9300 NEBS compliance applies only to SM-24 configurations. |
|||
|
Temperature: nonoperating |
-40 to 149°F (-40 to 65°C); maximum altitude is 40,000 ft |
|||
|
Humidity: operating |
5 to 95% noncondensing |
|||
|
Humidity: nonoperating |
5 to 95% noncondensing |
|||
|
Altitude: operating |
SM-24: 0 to 13,000 ft (3962 m) SM-36: 0 to 10,000 ft (3048 m); please see above Operating Temperature section for temperature adjustment notes |
|||
|
Altitude: nonoperating |
40,000 ft (12,192 m) |
Reviews
There are no reviews yet.