Electronic unit specific for ECOWATT PLUS series. Allows user configuration of schedules with up to three daily slots, in addition to the holiday period.
The programing console PROSYS ECOWATT is also necessary.

Control element for ECOWATT fans with DC brushless motor. It allows control via signal from an analogue output 0-10V depending of the status of three digital inputs free of power. Before each change of digital signal, it can be attributed a voltage output value between 0 and 10V.

Mode of operation:
1. Remote ON/OFF with two speed switch.
2. Up to three switch speeds taking as output the most unfavorable value.

Electronic control with display for single phase 230V-50/60Hz fans.
Analogical input 0-10V or 4-20mA: The fan works proportionally to the input value with adjustments of the minimum and maximum values of the inputs and outputs.
“ON/OFF”: when the potential free contact (f.e. clock) close, the fan putting into operation according to the voltage of the analogical input. This connection associated to a PIR detector allows to have a ventilation system type minimum-maximum.
Input « maximum speed »: given an external signal, the fan works at a maximum adjusted speed.
Outputs: Magneto-termic dry contact.
Illumination 230V 50Hz (max. 8A).
Electrical supply master/slave 24Vdc (max. 100mA).

Single phase motors.
Allows speed control of single phase fan by voltage variation.
Especially suited for constant pressure systems.
Includes a power cable and pressure tube.
Integrated pressure transducer (12VDC).
Supplied with cable glands.
Function integrated boost fan, adjustable from 10-60 min.
Display with three digits.
Entries for remote control “ON/OFF” + “select maximum speed”.
Configurable input for analog sensor current / voltage / NTC thermistor sensor / Pt1000.

Control module that can adapt the all/nothing proportional input signal of a detector or a probe to control a motorised flap, or a two-speed single phase or DC_fan, in minimum/maximum option.
Power supply: 24 VAC / 24 VDC.

Remote speed control.
Enables the speed control of the fan continuously, manually and remote.
Power supply: 1-230 V.

Sensors for the duct that, combining with a control, allow optimizing the energy of the ventilation system .

Ambient sensors that, combining with a control, allow optimizing the energy of the ventilation system

TDP-S
Pressure sensor.
TDP-D
Pressure sensor, with display.
TDP-PI
Pressure sensor with display and integral proportional control by set point. Direct control output signal for ECOWATT fans or VFTM frequency inverters.
Pressure sensors. This sensors are used to control the pressure of DCV systems with constant pressure (COP). They allow the reading of the difference of pressures between two points and transform it into an analog signal suitable for the different control devices.

CPFL
Presence detector for ceiling mount, sensitive to infrared radiation emitted by bodies in movement, with a 360º detecting angle.
Power supply: 1-230 V.

CPFL-S: Surface model.
CPFL-E: Flush mount model.