CISCO – CWDM-OADM1-1570OADM EWDM MODULE

Cisco SFP-GPON-B-I is a Gigabit passive optical network (GPON) Class B+ SFP OLT transceiver module, delivering 1490-nm TX/1310-nm RX wavelength, I-Temp.

Quick Spec

Table 1 shows the quick spec.

Compare to Similar Item

Table 2 shows the comparison.

The Cisco 1000BASE-T Gigabit Interface Converter (GBIC) is an ideal solution for Catalyst ® 6500, 4000, 3550, 2950, 3500 XL and 2900 XL Series switch customers, providing full duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructures. This GBIC technology leverages the industryâ€s flexible, standards-based 1000BASE-X design, allowing for a simple and low-cost migration path to Gigabit Ethernet. There are two key product applications for the Cisco 1000BASE-T GBIC: connectivity to high-end workstations and distribution and wiring closet interconnectivity.

The Cisco 1000BASE-T GBIC (product number WS-G5483) connects a GBIC port to Category 5 wiring using a standard RJ-45 interface. The maximum Category 5 wiring distance is 328 feet (100 meters).

XFP-10G-MM-SR – Cisco 10GBASE-SR XFP Module for MMF.

The Cisco® XFP Module offers customers a variety of 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity options for data center, enterprise wiring closet, and service provider transport applications.

Main features of the Cisco XFP Module include:

Supports 10GBASE Ethernet and OC-192/STM-64 data rates

Hot-swappable input/output device plugs into a XFP port of a Cisco Systems® router to link the port with the network

Provides flexibility of interface choice

Supports “pay-as-you-populate†model

Supports the digital optical monitoring capability

Supports the Cisco quality identification (ID) feature that helps enable a Cisco switch or router to identify whether the module is a Cisco certified and tested XFP

Supports optical interoperability with respective Cisco 10GBASE XENPAK and X2, and SFP+ modules on the same link

Quick Specs

Figure 1 shows the appearance of XFP-10G-MM-SR.

Table 1 shows the Quick Specs.

Table 2.Optical Transmit and Receive Specifications

10GBASE XENPAK modules offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications .

Main features of Cisco 10GBASE XENPAK modules include:

Supports 10GBASE Ethernet

Hot-swappable input/output device plugs into an Ethernet XENPAK port of a Cisco switch or router to link the port with the network

Provides flexibility of interface choice

Supports “pay-as-you-populate model

Supports the Cisco quality identification feature that enables a Cisco switch or router to identify whether the module is a Cisco certified and tested XENPAK module

Interoperable with respective Cisco 10-Gigabit X2, XFP and SFP+ modules on the same link

Quick Specs

Figure 1 shows the appearance of XENPAK-10GB-LR+.

Table 1 shows the Quick Specs.

Table 2 Optical Transmit and Receive Specifications for IEEE 802.3 standard compliant modules.

The Cisco 10GBASE-SR Module supports a link length of 26m on standard FDDI grade MMF. Using 2000 MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700 MHz*km MMF (OM4), up to 400m link lengths are possible.

Quick Specs

Table 1 shows the Quick Specs.

Table 2 Optical Transmit and Receive Specifications.