Area system of simultaneous detection of CO and NO2 in the same module line, which allows controlling up to 16 detectors with possibility of programming up to 2 groups , allowing individual manoeuvres in case of different gases or sectorised manoeuvres if they are the same gas.
Each detector is individually monotorised, showing on the display its status in real time.
Expandable from one to four areas completely independent.
It incorporates the Spanish and Portuguese regulations.
Programmation in English, Spanish and Portuguese.

Area system of simultaneous detection of CO and NO2 in the same module line, which allows controlling up to 16 detectors with possibility of programming up to 2 groups , allowing individual manoeuvres in case of different gases or sectorised manoeuvres if they are the same gas.
Each detector is individually monotorised, showing on the display its status in real time.
Expandable from one to four areas completely independent.
It incorporates the Spanish and Portuguese regulations.
Programmation in English, Spanish and Portuguese.

Electronic unit specific for ECOWATT PLUS series. Allows user configuration of schedules with up to three daily slots, in addition to the holiday period.
The programing console PROSYS ECOWATT is also necessary.

Applications
Control of exhaust, supply and impulse fans for high and low pollution ventilation (comfort mode) and emergency smoke extract modes.
Fully compatible with pollution and fire detection systems. Ability to operate with internal clock (optional).
Operates at high and low speed (HS/LS) in pollution ventilation mode and at high speed in emergency smoke exhaust mode.
Three-phase 400V 2-speed motor control (Dahlander or independent windings) – motor (s) or just 1 speed, please consult us.
5 sizes of cabinets.
8 Sizes: 9/18/26/32/50/65/75 and 95A per motor.
Control unit for 1 motor with 2 speeds from 9 to 95A. Control unit for 2 motors with 2 speeds from 9 to 26A.
2 versions:
– “Master” unit for managing Comfort /Smoke exhaust fan, with or without clock.
– “Slave” unit to be controlled by a “Master”unit (control supply fans and jet fans). Power supply three phase 400V-50/60Hz + Earth.

Description
IP55 sealed enclosure, RAL 7035 colour.
Supplied with cable glands. Cut-off switch included in the facade (can be padlocked in 3 points) Integrated magnetic protection:
– Version for 1 motor 32 to 95A.
– Version for 2 motors 9 to 26A.
Integrated thermal protection (connected only in the comfort mode). Taking into account operational priorities: LS/HS comfort, smoke extraction, fire services switch.
Pollution ventilation input to connect either specific two-speed controller or pollution detection system.
Fire emergency input to connect specific fire emergency detection system.
Master version:
– Control devices indicator and operation display on the front.
– 24V low voltage for the power supply for external box units.

Specific CO detector, using semiconductor technology, specifically developed for Conventional CO Detection Panel.
In accordance to UNE 23300/84.

Control element for ECOWATT fans with DC brushless motor. It allows control via signal from an analogue output 0-10V depending of the status of three digital inputs free of power. Before each change of digital signal, it can be attributed a voltage output value between 0 and 10V.

Mode of operation:
1. Remote ON/OFF with two speed switch.
2. Up to three switch speeds taking as output the most unfavorable value.

Programming console specific for ECOWATT PLUS series. Allows user selection and adjustment of any operating mode: constant pressure (COP), constant airflow value (CAV), variable air value (VAV) and minimum-maximum.
It includes an RJ45 cable of 1 meter length for connection to the fan.

Electronic control with display for single phase 230V-50/60Hz fans.
Analogical input 0-10V or 4-20mA: The fan works proportionally to the input value with adjustments of the minimum and maximum values of the inputs and outputs.
“ON/OFF”: when the potential free contact (f.e. clock) close, the fan putting into operation according to the voltage of the analogical input. This connection associated to a PIR detector allows to have a ventilation system type minimum-maximum.
Input « maximum speed »: given an external signal, the fan works at a maximum adjusted speed.
Outputs: Magneto-termic dry contact.
Illumination 230V 50Hz (max. 8A).
Electrical supply master/slave 24Vdc (max. 100mA).

Single phase motors.
Allows speed control of single phase fan by voltage variation.
Especially suited for constant pressure systems.
Includes a power cable and pressure tube.
Integrated pressure transducer (12VDC).
Supplied with cable glands.
Function integrated boost fan, adjustable from 10-60 min.
Display with three digits.
Entries for remote control “ON/OFF” + “select maximum speed”.
Configurable input for analog sensor current / voltage / NTC thermistor sensor / Pt1000.

Control module that can adapt the all/nothing proportional input signal of a detector or a probe to control a motorised flap, or a two-speed single phase or DC_fan, in minimum/maximum option.
Power supply: 24 VAC / 24 VDC.