,

CISCO – FPR-C9300-AC FIREPOWER 9300 SERIES APPLIANCES FIREWALL

SKU: FPR-C9300-AC
Detail: Firepower 9300 Chassis for AC Power Supply
Availability: IN STOCK
Categories: ,

FPR-C9300-AC

Overview

This carrier-grade next-generation firewall (NGFW) is ideal for data centers and other high-performance settings that require low latency and high throughput. Deliver scalable, consistent security to workloads and data flows across physical, virtual, and cloud environments. With tightly integrated services, the Firepower 9000 Series lowers costs and supports open, programmable networks.

Quick Specs

Figure 1 shows the appearance of FPR-C9300-AC.

 

Table 1 shows the Quick Specs.

Product Number

FPR-C9300-AC

Dimensions (H x W x D)

5.25 x 17.5 x 32 in. (13.3 x 44.5 x 81.3 cm)

Form factor

3 Rack Units (3RU), fits standard 19-in. (48.3-cm) square-hole rack

Security module slots

3

Network module slots

2 (within supervisor)

Supervisor

Cisco Firepower 9000 Supervisor with 8 x 10 Gigabit Ethernet ports and 2 network module slots for I/O expansion

Security modules

Cisco Firepower 9000 Security Module 24 with 2 x SSDs in RAID-1 configuration

Cisco Firepower 9000 Security Module 36 with 2 x SSDs in RAID-1 configuration

Network modules

8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network modules

4 x 40 Gigabit Ethernet Quad SFP+ network modules

2 x 100 Gigabit Ethernet Quad SFP28 network modules (double-wide, occupies both network module bays)

Note: Firepower 9300 may also be deployed as a dedicated threat sensor, with fail-to-wire network modules. Please contact your Cisco representative for details.

Maximum number of interfaces

Up to 24 x 10 Gigabit Ethernet (SFP+) interfaces; up to 8 x 40 Gigabit Ethernet (QSFP+) interfaces with 2 network modules

Integrated network management ports

1 x Gigabit Ethernet copper port (on supervisor)

Serial port

1 x RJ-45 console

USB

1 x USB 2.0

Storage

Up to 2.4 TB per chassis (800 GB per security module in RAID-1 configuration)

Power supplies

AC power supply

-48V DC power supply

HVDC power supply

Input voltage

200 to 240V AC

-40V to -60V DC*

240 to 380V DC

Maximum input current

15.5A to 12.9A

69A to 42A

<14A at 200V

Maximum output power

2500W

2500W

2500W

Frequency

50 to 60 Hz

Efficiency (at 50% load)

92%

92%

92% (at 50% load)

Redundancy

1+1

Fans

4 hot-swappable fans

Noise

75.5 dBA at maximum fan speed

Rack mountable

Yes, mount rails included (4-post EIA-310-D rack)

Weight

105 lb (47.7 kg) with one security module; 135 lb (61.2 kg) fully configured

Temperature: standard operating

Up to 10,000 ft (3000 M): 32 to 104°F (0 to 40°C) for SM-24 module

32 to 88°F (0 to 35°C) for SM-36 module at sea-level

Altitude adjustment notes:

For SM-36, maximum temp is 35?°C, for every 1000 feet above sea level subtract 1?°C

Temperature: NEBS operating

Long term: 0 to 45°C, up to 6,000 ft (1829 m)

Long term: 0 to 35°C, 6,000 to 13,000 ft (1829-3964 m)

Short term: -5 to 55°C, up to 6,000 ft (1829 m)

Note: Cisco Firepower 9300 NEBS compliance applies only to SM-24 configurations.

Temperature: nonoperating

-40 to 149°F (-40 to 65°C); maximum altitude is 40,000 ft

Humidity: operating

5 to 95% noncondensing

Humidity: nonoperating

5 to 95% noncondensing

Altitude: operating

SM-24: 0 to 13,000 ft (3962 m)

SM-36: 0 to 10,000 ft (3048 m); please see above Operating Temperature section for temperature adjustment notes

Altitude: nonoperating

40,000 ft (12,192 m)

Reviews

There are no reviews yet.

Be the first to review “CISCO – FPR-C9300-AC FIREPOWER 9300 SERIES APPLIANCES FIREWALL”

Your email address will not be published. Required fields are marked *